What You Should Do in Building Wooden Cabinet Designs For Living Room
Building Wooden Cabinet Designs For Living Room is the project that will be completed over a weekend. Even tough pre-assembled cabinet is now available that will be quickly installed; making your own cabinet Living Room Design is the project that most people find enjoyable and also the source of pride for years to come. The main goal of cabinet making is to make sure the durable storage for the tools, materials, and also important items. So, it is advisable in ignoring the instructions that will encourage the use of plywood and also wood composites. For the best result, you have to use the sturdy hardwoods just like oak or even pine. Maple, even though slightly softer, may also work well for making the cabinet. Here is information for you.
Step for Make the Cabinets
For the first step, you need to cut the wood for the right measurements that you want of your Wooden Cabinet Designs For Living Room. Then, mark the area where some shelved will be placed in the pencil and also drill holes for screws to the depth of 2mm under the surface of the wall. Insert the shelves while you are maintaining the gap of 2mm from the front. After that, screw the shelves into the pre-driller holes and also use the glue in order to keep them firm.
For the second step, you should place the top of shelf and keep the gap of 2mm from back. Then, insert 30mm screws in the holes of the pilot. After that, attach the base of the shelf and also repeat the previous process, affixing with the screws and also glue. Join a kick board to a base by suing 30mm nails and then leave the gap between a kick board and also edges. You need also to fix the back kick board between the sides by using the nails, at this time you can leave a gap of 10mm from the back.
For the next step, it is important for you to cut the square rear panel and also screw it to the back of your Wooden Cabinet Designs For Living Room. On the door pieces, you can drill holes into the marks that you have placed earlier for your shelves. After that, fix them and make sure that a gap of 2mm from the front also back. Screw them into the place. Then, attach the door panels to the front of the self by using the nails.
After that, place your cabinet on the floor and then cut out the area for the hinges according to the measurement of the door. Make sure that the gap of 2mm between the door and the top and also the bottom of your cabinet. You need to screw in your cabinet doors and then use the magnetic catches in order to ensure that the door will remain in position when it is closed.
For the last step, fix the handles to the doors of any outer panel. You can use the wood putty in filling up all the visible screw holes. By using the sandpaper, smooth the surface of your cabinet to make sure that the front is sanded well. You can apply lacquer and also paint if you want to do that.
